Descripción
Medidor LCR de banco, impedancia máxima 1,200 Ω; equipo con precisión de ± 0.06%, 7 rangos. Comunicación: RS232 y salida para impresora; display LCD Mono. Modelo Hioki RM3543
código: RM3543
Hioki RM3543 Medidor LCR de banco 1,200Ω
Description
Características
Medidor LCR de banco 1,200Ω – Hioki RM3543
- » Resistance Meter for Ultra-low and Low Shunt Resistance
- » ±0.16% accuracy & 0.01µΩ resolution performance in automated systems
- » Superb repeatable measurement accuracy
- » Provide advanced contact-check, comparator, and data export functions
- » It is intuitive user interface and strong noise immunity are suitable for use in automated systems
- » Test fixtures are not supplied with the unit. Select an optional test fixture when ordering.
- » Measurement method: Four-terminal, constant-current DC
- » Resistance range: 10 mΩ (Max. 12.00000 mΩ, 0.01 µΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 m&Omega resolution), 7 steps
- » Display: Monochrome graphic LCD 240 × 64 dot, white LED backlight
- » Measurement accuracy: [at 10 mΩ range, with SLOW mode, average 16 times settings] ±0.060 % rdg. ±0.001 % f.s.
- » Testing current: [at 10 mΩ range] 1 A DC to [at 1000 Ω range] 1 mA DC
- » Open-terminal voltage: 20 V DC max. Note: Voltage when not measuring is 20 mV or less, with current mode set at PULSE and Contact Improver Setting set at OFF/PULSE (measured with a voltmeter having 10 MΩ)
- » Sampling rate: FAST, MEDIUM, SLOW, 3 settings
- » Integration time: [at 10 mO range, default value] FAST 2.0 ms, MED 5.0 ms, SLOW 1 PLC, Setting range: 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz Note: PLC = one power line cycle (mains wave-form period)
- » Other functions: Comparator (compare setting value with measurement value), Delay, OVC (offset voltage compensation), Average, Measurement fault detection, Probe short-circuit detection, Improve contact, Current mode setting (A pulse application function that applies current only during measurement), Auto-memory, Statistical calculations, Settings monitor (when using two instruments, a difference in settings causes warning notification), Retry, Trigger function. etc.
- » Interface: External I/O, RS-232C, Printer
- » External I/O: Trigger, Hold input, Comparator output, Settings monitor terminal, Service power output +5V, +12V, etc.
- » Power supply, consumption: 100 to 240 V AC, 50/60 Hz, 40 VA max.
Qué Incluye:
- • Power cord × 1
- • EXT I/O male connector × 1
- • Operation manual × 1
- • Operation guide × 1
Reviews
There are no reviews yet.