Hioki FT3470-52 Medidor de campo electromagnético con sensores de 100cm2 y 3cm2

Descripción

Medidor de campo electromagnético con rango de 10 Hz a 400 KHz, cuenta con un sensor de 100cm2 y otro de 3cm2; puede utilizar las sig. unidades de medida: T, G, A/m, cuenta con comunicación USB, este modelo cumple con los estándares: ICNIRP 2010; IEC 62110/IEEE 644. Modelo Hioki FT3470-52

código: FT3470-52

Description

Características
Medidor de campo electromagnético con sensores de 100cm2 y 3cm2 – Hioki FT3470-52
  • Providing robust support for 3-axis magnetic flux density measurement
  • Complies with ICNIRP 2010 guidelines as well as other relevant standards for evaluation testing.
  • Complies with IEC 62110/IEEE 644 as well as IEC 62233.
  • Bundled with 3 cm2 Sensor used for magnetic field distribution analysis, and 100 cm2 Sensor used with the IEC/EN 62233 standard analysis
  • User-selectable display units (T, A/m, and G)
  • Simple operation for easy measurement
  • Bundled with PC application software
  • Level output for RMS value, or 3-axis waveform output for magnetic fields
  • Magnetic flux density (Band width): 10 Hz to 400 kHz/ 10 Hz to 2 kHz/ 2 kHz to 400 kHz
  • Exposure level: General Public/ Occupational
  • Display: Single axes X, Y, Z (2000 counts), Composite RMS value R (3464 counts), Magnetic flux density (unit: T, G, A/m), Exposure level (unit: %)
  • Magnetic flux density/ Ranges, Accuracy: [X, Y, Z axes] Effective measuring ranges: 2.000 µT to 2.000 mT, 4 ranges, Accuracy: ±3.5% rdg. ±0.5% f.s.; [R axis] Effective measuring ranges: 3.464 µT to 3.464 mT, 4 ranges, Accuracy: ±3.5% rdg. ±0.5% f.s.; [Valid measurement frequency range]; at 10 Hz-400 kHz mode: 50 Hz to 100 kHz; at 10 Hz-2 kHz mode: 50 Hz to 1 kHz; at 2 kHz-400 kHz mode: 5 kHz to 100 kHz
  • Exposure level/ Ranges, Accuracy: [X, Y, Z axes] Effective measuring ranges: 20.00 % to 200.0 %, 2 ranges; [R axis] Effective measuring ranges: 34.64 % to 346.4 %, 2 ranges, Accuracy: Smoothed edges 50 Hz to 1 kHz ±3.5% rdg. ±0.5% f.s.; Accuracy: Smoothed edges 1 kHz to 100 kHz ±5.0% rdg. ±0.5% f.s.
  • Interface: [Supporting output] Resultant RMS level output, Exposure level output, Waveform output of magnetic flux density X/ Y/ Z each axis, Output rate: 0.1 mV/display value count. [USB 1.1] Data saving with the PC application
  • Other functions: Memory function: Up to 99 measured value data, Slow function, Holds the maximum value, Auto power off, Buzzer sound on/off
  • Power supply: 4 LR6 alkaline battery, Continuous use of 10 hours, or AC ADAPTER 9445-02 (1.0 VA max. consumption)
Qué Incluye:
  • 1x 100cm2 Sensor
  • 1x 3cm2 Sensor
  • 1x Instruction manual
  • 1x CD-R (PC application software DATA VIEWER for FT3470)
  • 1x USB cable
  • 4x LR6 alkaline battery
  • 1x Extensión cable 9758
  • 1x Output cable 9759
  • 1x Carrying case

Reviews

There are no reviews yet.

Be the first to review “Hioki FT3470-52 Medidor de campo electromagnético con sensores de 100cm2 y 3cm2”

Your email address will not be published. Required fields are marked *

Title

Go to Top