Descripción
Probador de baterías de con 3 rangos, de hasta 6V, 60V ó 300V con precisión de ±0.01%; display de LEDs. Cuenta con comunicación RS232 y GPIB; este modelo cuenta con una salida analógica. Modelo Hioki BT3563-01
código: BT3563-01
Hioki BT3563-01 Probador de baterias hasta 300V
Description
Características
Probador de baterias hasta 300V – Hioki BT3563-01
- » Measure high-voltage battery packs up to 300V
- » Testing for production line of high-voltage battery pack and battery module
- » Large (low-resistance) cell testing
- » Choice of PC interfaces for full remote operation
- » Note: The comparison threshold values depend on the battery manufacturer, type, and capacity, and these must be established by the user.
- » Measurement leads are not included. Purchase the appropriate lead option for your application separately.
- » The male (system side) of the EXT I/O connector is also available. Please inquire with your HIOKI distributor.
- » Max. applied measurement voltage: ±300 V DC rated input voltage; ±300 V DC maximum rated voltage above ground
- » Resistance Measurement ranges: 3 mΩ (Max. display 3.1000 mΩ, resolution 0.1 µΩ) to 3000 Ω (Max. display 3100.0 Ω, resolution 100 mΩ), 7 ranges; Accuracy: 30 mΩ to 3000Ω ranges, ±0.5 % rdg. ±5 dgt. (Add ±3 dgt. for EX.FAST, or ±2 dgt. for FAST and MEDIUM); 3 mΩ range, ±0.5 % rdg. ±10 dgt. (Add ±30 dgt. for EX.FAST, or ±10 dgt. for FAST, or ±5 dgt. for MEDIUM); Testing source frequency: 1kHz ±0.2Hz, testing current: 100 mA (3 mΩ range) to 10 µA (3000O range); Open-circuit Voltage
- » Voltage Measurement ranges: DC 6 V (resolution 10 µV) to DC 300 V (resolution 1 mV), 3 ranges
- » Accuracy: ±0.01 % rdg. ±3 dgt. (Add ±3 dgt. for EX.FAST, or ±2 dgt. for FAST and MEDIUM)
- » Display: 31000 full digits (resistance), 600000 full digits (voltage), LED
- » Sampling rate: Four steps 4 ms(Extra-FAST), 12 ms(FAST), 35 ms(Medium), 150 ms(Slow) (Typ., sampling time depends on supply frequency settings and function.)
- » Measurement time: Response time + sampling rate, approx. 10 ms for measurements (Response time depends on reference values and the measurement object.)
- » Comparator functions: Setting: Upper and lower limit. Output: 3 levels (Hi, In, Lo) or (Pass, Fail), Open-collector(35V, DC50mA max), Display, Dual audible indicator
- » Analog Output: Measured resistance (displayed value, from 0 to 3.1V DC)
- » Interface: External I/O, RS-232C, Printer (RS-232C), GP-IB
- » Power supply: 100 to 240 V AC, 50/60 Hz, 30 VA max.
Qué Incluye:
Power cord × 1
Reviews
There are no reviews yet.