Descripción
Pinza amperimétrica para conectar a equipos. 30A DC, ⌀5mm de diámetro, precisión del 1%, conector BNC. Sensibilidad 0.1 V/A, RMS; longitud del cable de conexión: 1.5m, ancho de banda 50 MHz
código: 3273-50
Hioki 3273-50 Pinza amperimétrica 30A DC. ⌀5mm, conector BNC
Description
Características
Pinza amperimétrica 30A DC. ⌀5mm, conector BNC – Hioki 3273-50
- Wide band: DC to 50 MHz (-3 dB)
- High S/N characteristic enables measuring ultra low mA-range current waveforms
- Connects directly to oscilloscope BNC input terminal
- Connects directly to the MEMORY HiCORDER to provide waveform monitoring
- An optional power supply is available for use with oscilloscopes that do not provide probe power
- Connect and power up Clamp-on sensor to use in combination with the oscilloscope, or the MEMORY HiCORDER
- Frequency band width DC to 50 MHz (-3 dB)
- Rise time =<7 ns
- Noise level 2.5 mA rms max. (band width limited to 20 MHz)
- Continuous allowable input 30 A rms (requires derating at frequency)
- Max. allowable peak input 50 A peak (non continuous)
- Amplitude accuracy ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 30 A rms), ±2 % rdg. (DC, 45 to 66 Hz, 30 A rms to 50 A peak)
- Output rate 0.1 V/A (use with a device having a 1 M-ohm input resistance or higher)
- Max. rated voltage to earth 300 V CAT I (insulated wire)
- Core jaw dia. Ø5 mm(0.20 in)
Reviews
There are no reviews yet.