Description
Características
Probador LCR de banco 0.94 pF – Hioki 3504-50
- » High speed measurement of 2ms
- » Supports C measurements with voltage dependency characteristics through the use of constant voltage testing (CV)
- » Model 3504-60 can detect contact failure on all 4 terminals for increased reliability
- » BIN function on the 3504-60/-50 is ideal for sorting machines
- » In all models, contact error is constantly monitored during measurement, contributing to increased yield
- » Measurement parameters: Cs, Cp (capacitance), D (loss coefficient tan δ)
- » Measurement ranges: C: 0.9400 pF to 20.0000 mF, D: 0.00001 to 1.99000
- » Basic accuracy: (typical value) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016. Measurement accuracy = Basic accuracy × B × C × D × E, B to E is coefficient
- » Source frequency: 120Hz, 1kHz
- » Measurement signal level: 100mV (3504-60 only), 500mV, 1V rms. Measurement range CV 100mV: up to 170µF range (Source frequency 1kHz), up to 1.45mF range (Source frequency 120Hz). Measurement range CV 500mV: up to 170µF range (Source frequency 1kHz), up to 1.45mF range (Source frequency 120Hz). Measurement range CV 1V: up to 70µF range (Source frequency 1kHz), up to 700µF range (Source frequency 120Hz)
- » Output resistance: 5Ω (In open terminal voltage mode outside of the CV measurement range)
- » Display: LED (six digits, full scale count depends on measurement range)
- » Measurement times: 2ms typical (1 kHz, FAST mode); Actual measurement time depends on measurement configuration settings
- » Function: 4-terminal contact check function (3504-60 only). BIN (measurement values can be classified by rank) (3504-50, 3504-60), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, EXT. I/O, RS-232C (all models standard), GP-IB (3504-50, 3504-60)
- » Power consumption: Selectable 100, 120, 220 or 240V AC ±10%, 50/60Hz, 110VA max.
Qué Incluye:
- • Power cord × 1
- • Spare fuse × 1
Reviews
There are no reviews yet.