Descripción
Pinza amperimétrica para conectar equipos, 30A AC/DC, ⌀5mm de diámetro, precisión del 1%, conector BNC. Sensibilidad 0.1 V/A, RMS; longitud del cable de conexión: 1m, ancho de banda 100 MHz
código: 3276
Hioki 3276 Sonda de Corriente 30A AC/DC. ⌀5mm, conector BNC
Description
Características
Sonda de Corriente 30A AC/DC. ⌀5mm, conector BNC – Hioki 3276
- Wide band: DC to 100 MHz (-3 dB)
- High S/N characteristic enables measuring ultra low mA-range current waveforms
- Connects directly to oscilloscope BNC input terminal
- Connects directly to the MEMORY HiCORDER to provide waveform monitoring
- An optional power supply is available for use with oscilloscopes that do not provide probe power
- Frequency band width DC to 100 MHz (-3 dB)
- Rise time =<3.5 ns
- Noise level 2.5 mA rms max. (band width limited to 20 MHz)
- Continuous allowable input 30 A rms (requires derating at frequency)
- Max. allowable peak input 50 A peak (non continuous)
- Amplitude accuracy ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 30 A rms), ±2 % rdg. (DC, 45 to 66 Hz, 30 A to 50 A peak)
- Output rate 0.1 V/A (use with a device having a 1 M-ohm input resistance or higher)
- Max. rated voltage to earth 300 V CAT I (insulated wire)
- Core jaw dia. Φ 5 mm(0.20 in)
Qué Incluye:
- 1x Hard case
- 1x Instruction manua
Reviews
There are no reviews yet.