Descripción
Pinza amperimétrica para conectar a equipos, hasta 150A DC con ⌀20mm diámetro con precisión del 1%, conector BNC. Sensibilidad 0.01 V/A, RMS; longitud del cable de conexión: 1m, ancho de banda 10 MHz
código: 3274
Hioki 3274 Pinza amperimétrica 150A DC. ⌀20mm, conector BNC
Description
Características
Pinza amperimétrica 150A DC. ⌀20mm, conector BNC – Hioki 3274
- » Even with the wide DC to 10 MHz frequency band, current waveforms up to 150 A can be directly observed in applications such as power device and power-on in-rush current monitoring
- » Connects directly to oscilloscope BNC input terminal
- » Connects directly to the MEMORY HiCORDER to provide waveform monitoring
- » An optional power supply is available for use with oscilloscopes that do not provide probe power
- » Frequency band width DC to 10 MHz (-3 dB)
- » Rise time =<35 ns
- » Noise level 25 mA rms max. (band width limited to 20 MHz)
- » Continuous allowable input 150 A rms (requires derating at frequency)
- » Max. allowable peak input 300 A peak (non continuous), 500 A peak (pulse width: 30 µs or shorter)
- » Amplitude accuracy ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 150 A rms), ±2.0 % rdg. (DC, 45 to 66 Hz, 150 A to 300 A peak)
- » Output rate 0.01 V/A (use with a device having a 1 M-ohm input resistance or higher)
- » Max. rated voltage to earth 600 V CAT II, 300 V CAT III (insulated wire)
- » Core jaw dia. Ø20 mm(0.79 in)
Reviews
There are no reviews yet.