Descripción
Medidor de Resistencia 1,000 TΩ DC (supermegaohmetro) de 8 rangos y precisión del 2%, prueba de voltaje de hasta 1,000 V. Display LCD, comunicación: GPIB y RS-232; este modelo trabaja a 110V. Modelo Hioki SM-7810
código: SM7810
Hioki SM-7810 Medidor de Resistencia 1,000 TΩ DC (supermegaohmetro)
Description
Características
Medidor de Resistencia 1,000 TΩ DC (supermegaohmetro) – Hioki SM-7810
- » Test the leakage current of MLCCs at the fastest speed of 6.8ms simultaneously over 8 channels
- » Conduct high-speed leakage current testing of large-capacity MLCCs in the high current range (1mA)
- » Improve testing reliability using the contact check function
- » Build a flexible system by making best use of the individual settings of each channel
- » The Super MO HiTESTER SM7810 is produced to order. An input/output terminal connection cable*1 is required separately; 1 Input/output terminal connector/plug and connection cable. Current input terminal connector and voltage output terminal plug are not included. Voltage input terminal connector is included. Input/output terminal connection cables are available in various lengths to suit HIOKI measurement systems. Please consult with your HIOKI distributor.
- » Number of channelss: 8 channels (parallel and simultaneous measurement)
- » Applied voltage: Supply voltage from external power source (voltage input terminal on the rear panel)
- » Measurement range: Current: 1 pA to 1 mA, Ranges: 100pA/ 1nA/ 10nA/ 100nA/ 1µA/ 10µA/ 100µA/ 1mA, Resistance: 1 × 102 Ω to 1 × 1015 Ω
- » Measurement speed, INDEX typical time: FAST: 6.8ms, MED: 26.0ms, SLOW: 100.0ms, SLOW2: 320.0ms
- » Basic measurement accuracy (1µA range, FAST): Current accuracy: ±(2.0+ (0.5µA / (Measured current value)) ) %. Resistance accuracy: Current accuracy + Voltage generation accuracy of external power supply
- » Testing voltage setting: 0.1 V to 1000.0 V (Resolution: 0.1 V)
- » Contact check: Judges the contact state by comparing the measured capacitance to a reference value
- » Other functions: Trigger delay, averaging, contact check, jig capacity open correction, Measured value comparison and judgment, jig resistance open correction functions
- » Interfaces: GP-IB, RS-232C, EXT I/O
- » Power supply, consumption: AC 100V/110 V, 50/60 Hz, 30 VA
Qué Incluye:
- • 1 Power cord
- • 1x Voltage input connector
- • 1x Spare fuse (built into inlet)
- • 4x Rubber feet
- • 1x Manual de usuario
Reviews
There are no reviews yet.